Microneedling for Black Skin
9. November 2018



Designed for applying Micro-Needling Therapy by vibration


Puncturing the skin promotes a natural production of collagen and elastin while the skin heals.


1. Settings

Ensure that you have charged the device for at least 1-hour prior of use. The green light is the indication that the device is fully charge.

2. Adjustment of speed and needle length

Adjustment of Speed
Holding the power button for 2 seconds will activate the device.
Push ON/OFF button in order to adjust speed.
Red light is the indicator of maximum speed at 10,000 Revolutions Per Minute, while blue, purple, yellow and green are indicators of lower speeds.
The green light is the indicator of the lowest speed on the device.

Adjustment of needle length
You may achieve the desired length of the needle by rotating the adjustment ring from 0.25 mm to 2.50 mm.

Recommended lengths for procedure types
Length 0.25 mm – 0.50 mm for rolling method
Length 1.00 mm – 2.50 mm for stamping method

3. Assemble

Take out needle cartridge from the sterilized package.
Place the cartridge on the designated place, gently push and rotate.
Adjustment of needle length should be done after turning on the device.
To remove the needle cartridge, gently turn and pull.